DK Digital CDB-700 Instruction Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
3. WIRING
IMR02C16-E3
6
3.1.2 Wiring method
Connection to the RS-485 port of the host computer (master)
Host computer (Master)
RS-485
Paired wire
Shielded twisted
pair wire
Controller (Slave)
Maximum connections: Up to 31 controllers
*R
*R: Termination resistors (Example: 120 1/2 W )
If communication errors occur frequently due to the
operation environment or the communication distance,
connect termination resistors.
*R
T/R (B)
T/R (A)
SG
T/R (B)
T/R (A)
SG
T/R (B)
T/R (A)
SG
Screw Size: M3
×
7 (with 5.8
×
5.8 square washer)
Recommended tightening torque:
0.4 Nm (4 kgfcm)
Specified solderless terminals:
Manufactured by J.S.T MFG CO.,LTD.
Circular terminal with isolation V1.25-MS3
(M3 screw, width 5.5 mm, hole diameter 3.2 mm)
(+)
()
(+)
()
(+)
()
y
y
y
Controller (Slave)
13 (25)
14 (26)
15 (27)
13 (25)
14 (26)
15 (27)
Connection to the RS-232C port of the host computer (master)
Use a RS-232C/RS-485 converter with an automatic send/receive transfer function.
RS-485
Paired wire
Shielded twisted
pair wire
Maximum connections: Up to 31 controllers
T/R (B)
T/R (A)
SG
T/R (B)
T/R (A)
SG
(+)
()
(+)
()
y
y
y
RS-232C/RS-485
converter
T/R (B)
T/R (A)
SG
Host computer
(master)
RS-232C
Controller (Slave)
Controller (Slave)
*R
*R: Termination resistors (Example: 120 1/2 W)
If communication errors occur frequently due to the
operation environment or the communication distance,
connect termination resistors.
*R
Screw Size: M3
×
7 (with 5.8
×
5.8 square washer)
Recommended tightening torque:
0.4 Nm (4 kgfcm)
Specified solderless terminals:
Manufactured by J.S.T MFG CO.,LTD.
Circular terminal with isolation V1.25-MS3
(M3 screw, width 5.5 mm, hole diameter 3.2 mm)
Recommended converter:
CD485, CD485/V manufactured by
Data Link, Inc. or equivalent.
13 (25)
14 (26)
15 (27)
13 (25)
14 (26)
15 (27)
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 81 82

Comments to this Manuals

No comments